The A/C pressure cutoff switch is used to interrupt A/C compressor operation in the event of high system discharge pressures. The A/C pressure cutoff switch is mounted on a Schrader valve-type fitting on the high pressure side of the condenser to evaporator tube .A valve depressor, located inside the threaded end of the A/C pressure cutoff switch, presses on the Schrader valve stem. This allows the A/C pressure cutoff switch to monitor the compressor discharge pressure. It is not necessary to discharge the refrigerant system to remove the A/C pressure cutoff switch.. |
The A/C pressure cutoff switch has two sets of contacts. One electrical contact is normally closed. When the compressor discharge pressure rises, the switch contacts open, disengaging the A/C compressor. When the pressure drops, the contacts close to allow operation of the A/C compressor. The switch contains a second set of electrical contacts used for high-speed fan control. When the compressor discharge pressure rises, the contacts close and engage the high-speed fan control. When the pressure drops, the contacts again open and the high speed fan control is disengaged |
